![]() ![]() Improperly installed can cause issues in a Class 1 Div 1 or Div 2 area.Simple electrical maintenance, easy for any electrician to work with.Smaller runs of heat traced pipe can be used for drains that would be impossible to do with steam: put the heat right where you want it.Cut to length capability for most heat trace allows the user to keep extra on hand for quick jobs.A linear output of heat along its entire length: 8 watts at the start, 8 watts at the end.Much longer runs than steam trace, with some as long as 700 feet in one run.In this application, a customer’s losses at temperature must be less than 8 watts per foot in order for the cable to perform correctly. This wattage output is designed to offset losses through insulation into the ambient air. When 120 Volts is applied, 8 watts is produced. For example, a user might have 120V rated 8 watt heating cable. As voltage is applied, heat is produced at a stated rate. ![]() Costly steam trap audits and maintenanceĮlectric trace is a matrix with heating properties that looks like flat wire or cable.Steam temperatures don’t vary much (if you have 250 F steam, that’s what every application gets).Requires dedicated crew time for maintaining steam trace.Hard to do maintenance on valves and pumps, costs 70% more than piping to maintain. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |